WMK-20 pulse controller

Technical parameters of WMK-20 pulse controller:

Rated input voltage: AC220V (1 ± 10%) 50-60Hz

Rated output voltage: DC24V, DC36V, AC110V, AC220

Rated power consumption: ≤ 40W

Local output channels: within 100 channels

Pulse width: adjustable within the range of 0.01-0.8S (please specify when ordering if required)

Pulse interval: adjustable within the range of 1-90S (please specify when ordering if required)

Differential pressure control: switch signal (specified when ordering)

Operating environment temperature: -25 ℃ -+55 ℃, relative humidity of air not exceeding 85%, no severe corrosive gases or dust from conductive explosions, no severe vibrations or impacts.

Weight: 2kg

Dimensions: 250mm x 200mm x 100mm (length x width x height)

The WMK-20 pulse controller is designed specifically for pulse bag filters, with advantages such as miniaturization, multifunctionality, low power consumption, good integration, strong interference, and simple operation and maintenance. Satisfy the matching use of various pulse bag filter hosts.

The WMK-20 pulse controller adopts the current CMOS digital integrated circuit, which significantly improves the performance and anti-interference ability of the instrument. Controlled silicon output, stable performance, easy debugging, and easy maintenance.

The WMK-20 pulse controller is the main control equipment of the bag filter blowing and cleaning system. Its output signal directly controls the electromagnetic pulse valve, which uses compressed air to sequentially blow and clean the filter bag, keeping the resistance of the dust collector within the set range, and improving the processing capacity and dust collection effect of the dust collector.

The pulse controller is equipped with 1-10 gates, 10-20 gates, 20-50 gates, with voltages of 110V, 220V, and 24V.

The WMK-20 pulse controller inserts a rectangular plug with an output line into the rear socket of the chassis. One end of the output line is connected to one end of the solenoid valve, and the other end of the solenoid valve is connected to the common line. The common line is usually arranged at the back, and the wire color is red. Insert the power plug into a 220V AC power source.