Vertical dust humidifier

The vertical dust humidifier adopts a vertical humidifier and a vertical ratchet roller structure, with the ash outlet located at the upper end of the humidifier and the ash discharge outlet located at the lower end of the humidifier. In addition, the inner cylinder wall is equipped with corresponding rods that match the spacing of the rods on the roller shaft, which not only prevents adhesion but also increases the damping of falling dust, improves the mixing rate of dust and mist, saves power, and improves humidification quality, achieving the design goal of low power consumption and large processing capacity.

Working principle of vertical dust humidifier:

The dust recovered through dust treatment is transported to the screw conveying blade in the engine body through the star unloading valve, the humidification mixing master cylinder is pushed into the screw, the water spray is evenly injected into the sample under the uniform mixture of the propeller, the dust is humidified through uniform speed mixing, and the humidified dust is slowly transported to the multi column spiral. During the constant speed operation of the propeller, the vibration device works intermittently to cause changes in the peripheral wall of the mixture cylinder, causing it to oscillate and allowing the humidified viscous powder to detach from the metal cylinder wall and be sent to the unloader port.

A vertical dust humidifier is a device that sprays and mixes materials, and by controlling the amount of water added, it meets the appropriate moderate requirements. Vertical dust humidifiers are mainly used for dust removal in thermal power plants, and can also be used in industries such as metallurgy, mining, building materials, chemical engineering, power plants, boilers, etc. to humidify dust and powdery materials and transport them to the next processing stage, preventing dust and powdery materials from polluting the environment during transportation and handling.

Working principle of vertical dust humidifier:

The dust collected by the dust collector is fed into the spiral conveying blades inside the machine through a star shaped discharge valve, and then pushed into the humidifying mixing main cylinder through the spiral. Under the uniform mixing of the spiral body, water spray is evenly injected into the material, and under the action of uniform stirring, the dust is humidified. The humidified dust is slowly sent out from the discharge port under the linear thrust of the multi column spiral and discharged into the dust conveying device outside the machine. When the spiral body is running at a constant speed, the vibration device works intermittently, causing the wall of the mixing drum to oscillate with equal amplitude, separating the humidified viscous powder from the metal drum wall and sending it all to the discharge port for discharge.