Dual axis dust humidifier

Dual axis dust humidifier is a widely used equipment. The advantage of this device is its large humidification capacity and even humidification. Both normal and special working conditions can be used.

The dual axis dust humidifier adopts a cycloidal pinwheel reducer for smooth rotation and low noise. The double axis mixer feeds from the top and discharges from the bottom, with a reasonable structure. The sealing between each joint surface is tight and runs smoothly.

The dual axis dust humidifier is equipped with a humidification spray system to ensure even spraying and adjust the water supply to meet the needs. The manual oil pump is used to centrally supply lubricating grease to four transmission bearings, which facilitates the use and maintenance of the equipment and has the advantage of time-saving.

Product features of dual axis dust humidifier:

The dual axis dust humidification mixer is suitable for humidifying and mixing fly ash in power plants. The mixed fly ash has no dust flying during transportation, loading and unloading, avoiding environmental pollution. It is an equipment required for environmental protection.

After entering the mixing tank through the discharge port, fly ash is atomized and mixed with water before being discharged from the discharge port. This device is suitable for the dry ash conveying system of coal-fired power plants, used for mixing dry ash with water. This machine can smoothly convert dry ash into wet ash with a moisture content of about 25%, which can be loaded onto trucks for transportation. It can also convert dry ash into high concentration mortar, which can be loaded onto ships for transportation or transported by belts. This machine has the advantages of compact structure, uniform mixing, no dust, and meets environmental protection requirements. The processing capacity is 10-200 tons/hour and can be equipped with microcomputer control according to user requirements.

Characteristics of dual axis dust humidifier

1. The shell is mainly composed of plates and steel sections, welded and formed in the manufacturing plant, and assembled with other components to support the double axis mixer. The shell is tightly sealed, and there will be no flying ash or leakage.

2. The spiral shaft assembly is the main component of a dual axis mixer, which mainly includes left and right spiral shafts, bearing seats, bearing sleeves, bearing covers, gears, sprockets, oil cups, blades, and other components.

3. The water and humidity control piping mainly consists of connecting pipes, joints, and nozzles. The nozzle adopts a stainless steel atomizing cone nozzle, which is arranged above the mixer casing and arranged axially along the spiral axis to form a water curtain for the humidification and mixing of materials. The nozzle structure is simple and easy to replace, made of stainless steel material,. The moisture content of wet ash can be adjusted by operating the manual regulating valve on the water supply pipeline.

4. The cover plate mainly includes left cover plate, middle cover plate, right cover plate, hole cover, and maintenance hole cover. There are six inspection holes on both sides of the double shaft mixer for easy maintenance and upkeep by operators.