What are the issues to pay attention to when using a mine dust collector for dust removal?

What are the issues to pay attention to when using a mine dust collector for dust removal?

The following are the methods for operating mining dust collectors, as well as protection and maintenance methods. As long as you do the following, you can ensure the smooth operation of the equipment. The dust removal equipment cannot be stopped during operation, otherwise the ash hopper will be filled with dust, causing overflow in the bag chamber and forcing the dust collector to stop running. We keep in mind the precautions for each maintenance, as long as we are proficient in operation, we can make a dust removal equipment achieve the expected dust removal effect.

Long term dust removal of mining dust collectors is based on pre maintenance, as prolonged dust removal of equipment can hinder operation. If protection cannot be done regularly at this time, equipment may malfunction. It is also necessary to pay attention to some operating standards. The purpose of doing so is to keep the equipment in operation at all times, and to have a complete set of experience in equipment protection and maintenance. Therefore, we need to have a specific understanding of the protection and maintenance of mining dust collectors in practical applications.

Before the operation of the mine dust collector, check whether all components are normal. Do not rush to turn on the purification equipment, but first connect the tightly closed air to the air storage tank, connect it to the operating power supply, start the ash discharge equipment, and assume that there are other equipment in the system, start the downstream equipment first. When stopping work, there is no need to block the compressed air source, especially when the fan is working, compressed air must be provided to the lift valve cylinder in the open state of the valve. Regularly monitor process parameters such as flue gas, temperature, and concentration, and promptly identify and address any abnormalities. Managers should be familiar with the principles, performance, and operating environment of dust collectors, and master adjustment and maintenance methods. The oil-water separator in the air storage tank and gas source triple component should be discharged on a shift basis. The discharged oil-water separator should be cleaned every 3-6 months, and the oil mist should be regularly checked for oil storage and refilled in a timely manner. If the electromagnetic wave valve malfunctions, it should be promptly cleaned if there are impurities or moisture inside. If the diaphragm is damaged, it should be replaced in a timely manner.