TXP type ceramic cyclone dust collector

The TXP ceramic cyclone dust collector is also a centrifugal cyclone dust collector equipped with a dust separator. The original design system of TXP ceramic cyclone dust collector was considered for general industrial ventilation systems, but there are also many units that have been applied to industrial boiler flue gas dust removal, achieving good dust removal effects.

Structure and behavior of TXP ceramic cyclone dust collector:

The TXP ceramic cyclone dust collector is an improved design based on the practice of the C-type cyclone dust collector. After comparing the system experiment with the usage of several units, it has been proven that it is a high-performance vacuum cleaner.

The structure of TXP ceramic cyclone dust collector is similar to that of C-type cyclone dust collector. The cylinder part is still a double cone, and the upper part of the dust separation chamber is changed to a straight line shape, and the lower part is changed to a spiral shape, so that the return air of the dust separation chamber is introduced along the lower cylinder in the tangential direction to avoid the airflow inside the agitator body.

The structure of TXP ceramic cyclone dust collector is significantly different from that of C-type cyclone dust collector. The cylinder of the XLP/B cyclone dust collector is designed as a single cylinder and single cone, and the dust separator is designed as a spiral.

1. The TXP ceramic cyclone dust collector is a dry cyclone dust collector with a bypass.

2. The TXP ceramic cyclone dust collector is divided into X-type (suction type) and Y-type (press in type) according to the position of the fan in front and behind, with the X-type adding an outlet screw housing to the vacuum cleaner body. X. The Y type is divided into N type (left rotation) and S type (right rotation) according to the direction of the spiral shell.

3. TXP ceramic cyclone dust collector is mainly used for non adhesive dust, coal, sand, smoke and other dust.