XD-II Multi tube Cyclone Dust Collector

When the XD-II multi tube cyclone dust collector is under maintenance, the power should be cut off first, and the operator should carry the key to the operation panel and hang a sign saying "under maintenance, strictly prohibited from operation" on the operation panel. For positive pressure fiberglass bag filters used to handle high-temperature gases, measures should be taken to prevent heatstroke when hanging filter bags in the gas distribution room during summer for multi tube dust collectors. When the dust collection system of the multi tube dust collector is started or stopped, it is necessary to contact other positions and obtain approval before starting or stopping according to the operating procedures.

Working principle of XD-II multi tube cyclone dust collector:

When the dusty gas enters the gas distribution chamber of the ceramic multi tube dust collector through the main intake pipe, and then enters the annular gap between the ceramic cyclone body and the guide vane, the guide vane changes the gas from linear motion to circular motion. The majority of the rotating airflow follows the cyclone body in a spiral shape downwards from the cylindrical body, flowing towards the cone. The dusty gas generates centrifugal force during the rotation process, throwing dust particles with a density greater than that of the gas towards the cylinder wall. When dust particles come into contact with the cylinder wall, they lose their inertial force and rely on the momentum of the inlet velocity and downward gravity to fall along the wall into the ash discharge port and enter the main ash hopper. When the rotating downward external swirling airflow reaches the lower end of the cone, due to the contraction of the cone, it continues to spiral in the same direction of rotation from bottom to top along the axis of the cyclone tube (clean air). It enters the exhaust chamber through the ceramic cyclone body exhaust pipe and is discharged from the main exhaust port. After that, the smoke passes through it. In order to facilitate the maintenance of the dust removal system and cope with emergency situations, it is possible to build a bypass flue according to the conditions.

Characteristics of XD-II Multi tube Cyclone Dust Collector:

The XD-II multi tube cyclone dust collector is composed of multiple small cyclone dust collectors connected in parallel, and has good dust removal efficiency when dealing with the same air volume.

◆ Save installation space.

The XD-II multi tube cyclone dust collector has lower resistance loss than the dust removal device used in parallel with a single tube.