Woodworking dust collector

The woodworking dust collector adopts online pulse cleaning method, which saves the use of compressed air; The cabinet of the woodworking dust collector is made of Ansteel sheet metal, processed and formed by CNC production equipment, and has a modular unit assembly structure.

Working principle of woodworking dust collector:

The airflow containing wood chips is transported by a fan to the guide bin of the bag filter. The airflow velocity decreases under the action of the guide plate, and heavier wood chips fall into the ash bin under the action of gravity. Other lighter and finer dust particles are adsorbed on the outer surface of the filter bag along with the airflow. After being filtered by the bag, the clean gas enters the exhaust chamber and is discharged outside. As the filtration process continues, more and more dust will accumulate on the outer surface of the filter bag, which will increase the operating resistance of the system and reduce its dust removal efficiency. Therefore, this system is equipped with an automatic pulse dust cleaning device, which consists of a pulse controller, pulse valve, speed coupling, steam drum, and jet pipe. According to the characteristics of wood chips, the pulse amplitude and frequency can be set on the pulse controller. After setting the pulse amplitude and frequency, the system will automatically clean the filter bag during operation, thereby increasing the filtering efficiency and extending the service life of the filter bag.

What are the characteristics of woodworking dust collectors? Below we will introduce:

1) Adopting a rear mounted negative pressure for ventilation, the effect is good and the suction force is strong.

2) Compact equipment structure; The scope of use of sawdust dust collectors.

3) The dust removal filter bag used is breathable and has a long lifespan.

4) Strict quality control is implemented during product production, resulting in minimal equipment maintenance.

5) The equipment occupies a small area and is beautifully arranged.

Precautions for the use of woodworking dust collectors:

1. Before turning off the fan, it is necessary to first turn off the suction port of the woodworking equipment. After the system runs for 3-5 minutes, turn off the main unit.

2. Before starting the fan, it is necessary to turn on 3-5 air outlet switches at the end of the vacuum system, and then turn on the vacuum fan.

3. Check if each connecting part can be firmly connected.

4. Check the air tightness of the separation parts between the dust collector and ash hopper, ash hopper and ash discharge installation, ash conveying installation, etc., and eliminate the phenomenon of ash leakage and air leakage.

5. Close the small baffle valve, start the ventilation fan, and gradually open the baffle valve until there are no abnormal phenomena, so that the dust collector can pass through a regular amount of dusty gas.