Biomass boiler dust collector

Biomass boiler dust collector is a device used to remove dust from boiler plants. Boiler dust causes serious pollution to the atmospheric environment. Biomass boiler dust collector is a dust removal device that separates the dust in the boiler from the flue gas and further treats the boiler flue gas with clinical effects as the main sulfur and desulfurization treatment.

Biomass boiler dust collector is a commonly used supporting equipment in boilers and industrial consumption. The one-to-one bag filter for industrial boilers adopts the technique of pulse jet dust cleaning with air stop in each compartment, which overcomes the shortcomings of conventional pulse dust collectors and back blowing dust collectors in each compartment. It has the advantages of strong dust cleaning, good dust removal efficiency, low emission concentration, low air leakage rate, and low energy consumption.

To carry out the transformation of dust removal equipment for biomass pot dust collectors, the manufacturing of the dust removal equipment must be stopped first. Secondly, stop removing and installing the dust collector.

1. The volume of gas that can be purified by dust removal equipment per unit time. This is a prerequisite for determining the power and capacity of the dust collector. When selecting equipment, the power should be greater than the usual required power to avoid inconvenience.

2. From the high acceptance temperature of the filter material and the dew point temperature of the gas, the temperature must be used. When the gas is below the dew point temperature in daily work, the temperature should be raised, and when the gas is above the operating temperature, the temperature should be lowered.

3. Starting from the machine's operational cycle. Choose a machine that can work continuously for 24 hours based on your needs.

4. The speed at which the filtered gas passes through the filter material. This is an important point in choosing a desulfurization and dust collector.

5. Determine whether to choose a stable performance industrial single machine pulse dust collector based on whether the operating environment of the machine can be in an explosive and flammable place.

The operation process of biomass boiler dust collector device. After the boiler dust collector is transported to the construction site, our first step is to check the box number, equipment title, drawing number (or specification), number of accessories according to the packing list or other delivery list, count the parts, tools, accessories (or materials), factory certificate and other technical documents, make records, complete the relevant procedures after inspection, and keep them properly. If there is any damage, it should be repaired and corrected in a timely manner.

1. When installing a boiler bag filter, it is necessary to check whether the various accessories of the following equipment are diverse, whether the main engine is worn, whether the connecting parts are reliable, etc. In addition, it is also necessary to check whether there is any noise or poor operation of the fan of the boiler dust collector during operation. Once it is found, it should be repaired immediately.

2. When the boiler bag dust collector device is outdoors, a rain cover or rain shelter should be installed on the dust collector device. This can extend the service life of the dust collector.

3. The input end of the electromagnetic pulse valve is inserted into the metal tube of the gas storage cylinder, and its output end is inserted into the spray pipe of the dust collector. The valve is equipped with rubber sealing rings and fixing nuts at both ends, so that the electromagnetic pulse valve can be firmly fixed and sealed.

4. When installing the water separation filter pressure reducing valve device, make the direction of the arrow indicated by the water separation filter pressure reducing valve deviate from the direction of the compressed air movement.

5. Pay attention to whether there is condensation in the bag chamber and whether the ash discharge system is smooth. Avoid blockages and corrosion attacks, as severe dust accumulation can affect the consumption of the host.

6. Rotate the pulse control knob and the pulse jet controller sends instructions to open the electromagnetic pulse valve one by one to check if the dust cleaning action is correct.