Sintering machine dust collector

The sintering machine dust collector is a dust removal equipment that solves the problem of dusty flue gas at the tail of the sintering machine. In response to the characteristics of large exhaust volume, high gas temperature, and dust content at the tail of the sintering machine, when selecting a dust removal system for the sintering machine, analysis is carried out according to different situations of the sintering machine to achieve good dust removal effect of the bag filter.

The working principle and basic structure of a sintering machine dust collector are similar to those of a bag filter, but due to the use of sintered plate materials to make filter elements, it has many advantages compared to traditional dust collectors that use fiber filter materials to make filter elements (such as bag filters, flat bag filters, filter cartridges, etc.). The specific principle is that the dusty airflow enters the dust chamber of the middle box through the guide plate at the dust inlet, and the purified gas through the sintering plate is discharged by the fan. As the dust trapped on the surface coating of the sintered plate increases, the dust cleaning control system with timed or differential pressure working mode will automatically open the fast opening pulse valve, and use compressed air to sinter the dust on the surface of the plate. The sprayed dust will fall into the ash hopper under the action of gravity and be discharged.

Dust removal effect of sintering machine dust collector:

The tail of the sintering machine dust collector adopts a large capacity sealed bag dust collector, which has achieved ideal results. The large volume sealed hood at the tail of the machine can buffer intermittent impact airflow and reduce the exhaust volume of the dust collector; Connect the sealed covers of several vacuum boxes (not less than 5) of the sintering machine to the sealed cover at the tail of the machine as a whole, so that some of the dust containing gas at the tail of the machine can pass through the sintering material layer and vacuum box, and be extracted by the process smoke exhaust, which can also reduce the exhaust volume of the bag filter at the tail of the machine. In order to minimize the exhaust volume of the dust collector and fully utilize the capacity of the process smoke exhaust, the corners of the sintering machine, as well as the trolley and other air leakage points, should be strictly sealed to increase the dust removal effect of the dust collector.

Scope of application of sintering machine dust collector

The sintering machine dust collector is suitable for flue gas treatment in industries such as power, building materials, metallurgy, and chemical engineering, especially for high-temperature flue gas. It combines the characteristics of chamber back blowing and pulse cleaning, solving the shortcomings of insufficient intensity of ordinary chamber back blowing and general pulse cleaning dust re adsorption. Moreover, the extended dust removal filter bag plays the role of compressed air dust removal, making it a dust removal equipment with small footprint, stable operation, and convenient maintenance.